2/12/2023 0 Comments Roland egx 350 reviewsPower cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4. USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)ĪC 100 to 120 V ☑0%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1) or AC 220 to 240 V ☑0%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)ĭuring operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779) (According to ISO 7779)ġ5.5" (W) x 24.3" (D) x 23.3" (H) When cover is open: 23.56" x 21.5" x 27" The adapter should be replaced when damaged. The adapter connects the hose that runs from the machine to the vacuum and is sold as a kit from Jorlink. Adapter Vacuum Assy (Product 1000003262) is intended for use in the EGX-350. Z-axis : Up to 1.2 ips (30mm/sec)Ġ.004” (0.01 mm) /step or 0.001” (0.025 mm ) /step (XY axis only) Adapter, Vacuum Assy Adaptor EGX-350 Kit w/Hose & Vacuum Duct. The EGX-350 is also compatible with industry-standard engraving programs such as EngraveLab v7.1 and FlexiEngrave 8.51.ġ2”(X) x 9.1”(Y) x 1.6” x 40mm(Z)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |